UHU PLUS Epoxy jewelry glue 300kg cartridge

UHU Plus two-component epoxy resin-based adhesive 300 kg (Cartridge Packaging: Resin + Curing agent 50ml / 53g)

Two-component epoxy resin-based adhesive for fast, strong assembly.

Mixing ratio: 1 pt. of resin to 1 pt. of curing agent.

Use time: 2 hours at a temp. of 20°C. The curing time is temperature-dependent.

The adhesive is transparent as soon as it dries; resistant to impact, ageing and water.

Manufacturer: UHU GmbH & Co, KG, Buhl, Germany

Scope of application:

Materials: metal, glass, porcelain, ceramics, wood, marble, stone, concrete, glass fibre reinforced plastics, rigid PVC, rubber, rigid foams

Directions for use: The bonded surfaces must be clean, dry and degreased. Matte any smooth surfaces. Mix 1 part resin and 1 part curing agent (equal by volume).
Apply the adhesive to one side or both sides of the material. Place the glued parts together in the correct position without pressing.

Usage time: Depends on the amount of glue used and the temperature (approx. 2 hours at room temperature)

Curing time: Depends on the temperature; final strength can be increased by increasing the temperature (up to 200°C - table) :

Temperature, Curing time, Strength

 20 °C 12 h. 1200 N/cm2

40 °C 3 h. 1800 N/cm2

70 °C 45 Min. 2000 N/cm2

100 °C 10 Min. 2500 N/cm2

180 °C 5 Min. 3000 N/cm2

NOTE ! To use the cartridge, you must have the gun and mixing needle as shown in the photo gallery.